How To Remove Memory Card From Canon Camera

Commodity ID: ART137366 | Date published: 05/xiii/2015 | Date terminal updated: 11/04/2015

Clarification

Installing and Removing the Card

Solution

Installing and Removing the Card

The camera can use a CF card and SD menu. Images tin can be recorded when at least ane menu is installed in the photographic camera.

If a card is inserted in slots, you tin can select which carte to record images to or record the same images simultaneously on cards

If you use an SD card, be certain the carte du jour's write-protect switch is set upward to enable writing/erasing.

	1 Open the cover. Slide the comprehend as shown past the arrow to open it.
	2 Insert the card. The camera-front side slot is for a CF bill of fare, and the camera-dorsum side slot is for an SD card. Face the CF card's label side toward you and insert the end with the small holes into the camera. If the card is inserted in the incorrect way, information technology may damage the camera. The CF card eject push button will stick out. With the SD card's label facing y'all, push in the carte du jour until it clicks in place.
	iii Close the cover. Shut the cover and slide it in the direction shown by the arrows until it snaps shut. When yous fix the ability switch to <>, the number of possible shots and the loaded card(southward) will be displayed on the LCD panel. The images will be recorded to the carte du jour with the < > icon adjacent to the respective card'southward indicator.

• The camera cannot apply Type Ii CF cards or hard disk cards.

• Although the camera does non comply with the UHS (Ultra-High Speed) speed form standard, UHS SDHC/SDXC cards can be used.

• SDHC/SDXC memory cards can be used with the camera.

• Ultra DMA (UDMA) CF cards tin can also be used with the photographic camera. UDMA CF cards enable faster data writing.

• The number of possible shots depends on the remaining capacity of the carte du jour, paradigm-recording quality, ISO speed, etc.

• Setting [ : Release shutter without carte] to [Disable] volition prevent you lot from forgetting to insert a card

Removing the Bill of fare

ane Open up the cover. Set the power switch to <>. Make certain the access lamp is off, then open the cover. If [Recording ...] is displayed, shut the cover. ii Remove the bill of fare. To remove the CF menu, push button the eject button. To remove the SD bill of fare, push it in gently and release it. So pull information technology out. Pull the card straight out, then close the cover.

• When the access lamp is lit or blinking, it indicates that images are beingness written to or read by the card, being erased, or data is existence transferred. Exercise not open the card slot encompass during this time. Too, never do any of the post-obit while the access lamp is lit or blinking. Otherwise, information technology can damage the epitome information, card, or camera.

  • Removing the menu.

  • Removing the battery.

  • Shaking or banging the camera effectually.

• If the card already contains recorded images, the epitome number may not offset from 0001 (p.154).

• If a card-related mistake message is displayed on the LCD monitor, remove and reinsert the card. If the error persists, use a different bill of fare. If you tin can transfer all the images on the card to a computer, transfer all the images and then format the card with the photographic camera. The card may then return to normal.

• Do not bear upon the SD bill of fare's contacts with your fingers or metal objects.

Source: https://support.usa.canon.com/kb/index?page=content&id=ART137366

Posted by: clarknoreed.blogspot.com

Share this post